172 4-5 Driving Assistance Functions the ACC is temporarily deactivated until the accelerator pedal is released. ACC failure: There has been a failure in the system. No operation can be performed, and the ACC failure indicator lights up on the cluster. ACC System Activation Conditions The EPB is released. Vehicle is in D gear. The vehicle does not slide backwards. The trunk, hood, and all doors are closed. Driver seat belt is fastened. The ESC system is started, but not activated yet. The vehicle speed is not greater than 150 km/h (95 mph). The brake pedal is pressed when the vehicle speed is 0 km/h, or the brake pedal is not pressed when the vehicle speed is over 0 km/h.
There is no vehicle network communication failure prompt on the instrument cluster. The AEB function is not activated. Usage ACC activation/exit button Press button ① to activate or exit ACC (The system is in standby when activation conditions are met). (By default, ACC activation by pressing button ① sets the current speed as the cruise speed. If the current speed is below 30 km/h, the cruise speed is set to 30 km/h.)