196 4-5 Driving Assistance Functions Warning Use ESA based on your needs, traffic, and road conditions. Blind Spot Assist System* The blind spot assist system includes the following functions: blind spot detection (BSD), door open warning (DOW), rear collision warning (RCW), and rear cross traffic alert (RCTA). It detects environment behind the vehicle through radars installed on both sides of the rear bumper so as to remind the driver of safe driving. BSD* At vehicle speeds 15 km/h, if radar sensors detect a vehicle in blind spots on an adjacent lane or a vehicle approaching quickly on the adjacent lane, indicator on the corresponding side mirror lights up.
If the turn signal for the same side is turned on at this moment, the alarm indicator on the side mirror flashes to alert the driver of a risky lane change. RCTA* When the vehicle is reversing, the RCTA system detects the vehicles traveling in the blind spot at the back through radar. If the system determines that other vehicles approaching from behind may crash into the vehicle, indicators on side mirrors, cluster ambient light, and front interior ambient light flash so that the driver can reduce collision risk.
RCW* At vehicle speeds above 5 km/h, if radar sensors detects a risk of collision with a vehicle approaching too quickly from behind, cluster ambient light and front-row ambient light flash to alert the driver. At the same time, hazard warning light goes on to warn drivers on vehicles at the back against collision risk so that they will drive safely. DOW* DOW is realized with rear corner radars installed on both sides of the rear bumper. When the vehicle is stationary with doors unlocked, the