4-5 Driving Assistance Functions 197 system keeps indicators on side mirrors solid on to warn the driver if moving objects, such as bicycles or automobiles, approach from behind on an adjacent lane. At the same time, image and prompt message are displayed on the instrument cluster and front- and rear- row ambient lights are solid on. If the driver attempts to open the door at this time, indicators on side mirrors and front- and rear-row ambient lights begin to flash. Usage To enable or disable BSD, DOW, RCW or RCTA, go to infotainment system and tap DiPilot → Driving Assist → Blind Spot Assist. The system defaults to the previous settings when the vehicle starts.
When the blind spot assist system is disabled, no relevant indicators are displayed on the cluster. When the blind spot assist system is standing by, if vehicle conditions, such as speed or gear status, do not meet the requirements of any function, a gray indicator 4 is displayed on the cluster and blind spot assist will not be activated. Using and Driving If the blind spot assist system malfunctions, a yellow indicator icon is displayed on the cluster. is displayed on the cluster, meaning that the function has been activated and can trigger alarms at any time.
When the blind spot assist system is active, A green indicator Precautions While the BSD system provides assistance in monitoring blind spots of rearview mirrors, it cannot replace the driver’s observation and judgment. The driver must keep control of vehicle at all times and drive properly and is fully responsible for the vehicle. The BSD system may be unable to provide adequate warning on target vehicles approaching from behind at a high speed.