BYD Han — Intelligent Power Braking System

212 4-5 Driving Assistance Functions Traction Control System (TCS) TCS prevents the drive wheels from skidding during acceleration by reducing the motor power, and, when necessary, apply braking forces to prevent drive wheels from spinning. TCS makes it easy for vehicles to start, accelerate and climb under adverse driving conditions. Warning TCS may not work effectively in the following situations: When driving on slippery roads, even if TCS is working properly, it may not be able to control the direction and meet power requirements. Do not drive in conditions where the vehicle may lose its stability and power.

Hill Hold Control (HHC) After the brake pedal is released, HHC maintains the brake pressure imposed by the driver for 1.5 seconds to prevent backward sliding of the vehicle. Hydraulic Brake Assit (HBA) When the brake pedal is depressed quickly, HBA recognizes that the vehicle is in emergency condition. It quickly increases the brake pressure to the maximum, so that ABS can intervene more quickly and shorten the braking distance effectively.

Controller Deceleration Parking (CDP) When the EPB switch is pulled up, the CDP* function starts working so that the vehicle brakes at a constant deceleration (0.4 g when EPB is engaged but the brake pedal is not depressed, and 0.8 g when EPB is engaged and the brake pedal is depressed) until the vehicle stops. The function stops working if the EPB is released. The intelligent power braking system has the following new functions compared with the original ESC system: ESC operation instructions