BYD Han — Intelligent Power Braking System

4-5 Driving Assistance Functions 213 Brake assist mode The brake assist mode is used to adjust the brake pedal feel. The relation curve between the brake pedal depth and the vehicle deceleration varies across different modes for the driver to choose their preferred pedal feel. To adjust the brake pedal feel, go to (infotainment system) → Vehicle settings → Intelligent chassis → brake assist mode. CST CST function: When the vehicle decelerates to stop in a non- emergency situation, the integrated brake control system reduces the stop-instant suspension pitch and impact by controlling the brake pressure of the four brakes, providing a smooth stop feeling for the driver.

To enable or disable the CST function, go to (infotainment 4 system) → Vehicle settings → Intelligent chassis → CST. Using and Driving When the CST function is triggered, the braking distance may be slightly increased by 2-5 cm. Therefore, increase the distance from the vehicle or obstacle ahead accordingly before stopping your vehicle. Brake disc wiping Brake disc wiping function: When the wiper switch is on or the rain sensor detects rain, the integrated brake control system applies a small brake pressure to all four brakes so that pads come into contact with discs to remove the water film from the discs. This shortens brake response time and braking distance.

As long as the system detects rain or the wiper ON signal, the brake discs are repeatedly wiped at certain intervals to improve safety. ESC working