214 4-5 Driving Assistance Functions If there is a risk of skidding or backsliding when the vehicle starts on a slope, or if either drive wheel is spinning, the ESC indicator flashes to indicate that ESC system is working. Disabling ESC If the vehicle gets stuck in snow or mud, ESC may reduce power output from the motor to the wheels. In this case, you may need to turn off the system to get out of the jam. Turning off ESC To turn off the ESC system, press the physical button or tap (infotainment system) → DiPilot → Active safety → ESC. In addition, ESC checks its working status in real time.
If ESC OFF switch is pressed while ESC system is working, the system will complete the active intervention control rather than executes the "shutdown" command immediately. ESC is disabled only after the intervention control is complete. Some functions of the disabled ESC system may be re-enabled if the ESC OFF switch is pressed again or the vehicle speed exceeds the threshold (80 km/h). In order to prevent ESC from being turned off suddenly, ESC can be activated again only when it is not in a vehicle dynamic intervention state. Restarting ESC system When the ESC system has been turned off, restarting the vehicle will automatically restart ESC system. ESC system start and speed linkage