BYD Han — Maintenance Schedule

252 6-1 Maintenance Information inspections should be performed at 12 months or 20,000 km. Guide pin of brake caliper assembly check Once every 24 months or 40,000km. Steering wheel and tie rod check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km. Drive shaft boot check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km.

Ball pin and boot check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km. Front and rear suspension check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km. Check of tires and inflation pressure, includingTire Pressure Monitor System(TPMS) Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely.

Front and rear alignment check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km.