6-1 Maintenance Information 253 6 Service and Maintenance Tire Rotation Tires should be checked for air pressure and conditions at least once a month and rotated every 10,000 km. Door brake check Dust on the lever should be removed with a damp soft cloth, and 0.3 to 0.8 g of grease applied to the lever, riveting joint, and rotating shaft. Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Wheel bearing clearance check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km; where under harsh conditions, inspections should be performed at 12 months or 20,000 km.
Expansion tank coolant level check Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Drive motor antifreeze change The long-acting organic acid coolant should be changed every 4 years or 100,000 km, whichever comes first. Brake fluid check Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Brake fluid change The brake fluid should be changed every 2 years or 40,000 km. Check of vehicle module DTCs (to be cleared after recording) Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely.
Check of power battery tray, shield, impact bar, and mount point torque (QH) Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Capacity testing and calibration Every 72,000 km or 6 months. Check and change of gear oil in transmis- sion The initial change should be performed at 24 months or 40,000 km, and subsequent changes every 24 months or 48,000 km.