254 6-1 Maintenance Information Powertrain check for leaks and bumps Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Check for loose HV wiring harness and connectors Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. HV module check for deformation or oil stains Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Charging connector interface check for foreign materials or ablation Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely.
Activated carbon HEPA filter check* Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be replaced as necessary. Under harsh conditions, inspections should be performed every 6 months, where parts should be replaced when necessary. Common filter check Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be replaced as necessary. Under harsh conditions, inspections should be performed every 6 months, where parts should be replaced when necessary.
PM2.5 quick tester filter* check Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be replaced as necessary. Under harsh conditions, inspections should be performed every 6 months, where parts should be replaced when necessary. Electrostatic filter* check Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be replaced as necessary. Under harsh conditions, inspections should be performed every 6