BYD Han — Maintenance Schedule

6-1 Maintenance Information 255 6 Service and Maintenance months, where parts should be replaced when necessary. Check and replacement of car perfume bottle assembly* Inspections should be performed every 12 months or 20,000 km, whichever comes first, where parts should be replaced as necessary. Under harsh conditions, inspections should be performed every 6 months, where parts should be replaced when necessary. Lamp and LED lighting check Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Headlight dimming check Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely.

Initial downtilt calibration of low beam Once every 10,000 km. EPS GND point check for foreign materi- als or ablations Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. EPS connector looseness check and connector pin ablation check Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. EPS ECU corrosion check The initial inspection should be performed at 12 months or 20,000 km, and subse- quent inspections every 24 months or 40,000 km.

Check of connections between EPS ECU and motor for foreign materials or corro- sion* Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. Check of vehicle module software update (update if any) Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely. High-voltage part check for wading marks Inspections should be performed every 12 months or 20,000 km, where damaged parts should be replaced timely.