7-1 When Faults Occur 299 Stop and check the repaired tire, and observe again the tire pressure gauge reading on the inflator. If the tire pressure is greater than 220 kPa (2.2 bar), drive to the nearest service center at a speed below 80 km/h. If the tire pressure is between 130 and 220 kPa (1.3 and 2.2 bar), repeat the process to fill the tire sealant into the tire and observe the tire pressure gauge reading on the inflator. If the tire pressure does not reach 130 kPa (1.3 bar), it is recommended to contact a BYD authorized dealer or service provider. Tip Repairing damaged tires with the tire repair device is only an emergency solution.
Please change the tires at a professional repair center as soon as possible. It is recommended that you contact a BYD authorized dealer or service provider, and inform the repair technician that the tires contain tire sealant. After repairing a tire with the tire repair device, it is recommended that you purchase new tire sealant and inflation hoses at a BYD authorized dealer or service provider. Avoid hard acceleration and high-speed turns. Do not exceed the 80 km/h maximum speed limit and replace flat tires as soon as possible. Do not drive further if the vehicle experiences strong vibration, unstable performance or noise.
When the tire sealant is about to expire (see the label on the canister for exact expiry date), replace it with a new one. 7 After repairing a tire with the tire repair device, it is recommended that you purchase new tire sealant at a BYD authorized dealer or service provider. When Faults Occur