Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

PDSG4/PDSGE User's Manual 2-6 Connecting Cables ( *Note: the graphics shown in the chapter is based on the PDSG4. For the PDSGE Model, please refer to Page 1-6.) ATX Power Connector The main power supply connector (JPW1) on the PDSG4/PDSGE meets the SSI (Superset ATX) specifi cation. You can only use a 24-pin power sup- ply cable on the motherboard. Make sure that the orientation of the con- nector is correct. Processor Power Connector In addition to the Primary ATX power connector (above), the 12V 8-pin Pro- cessor connector at JPW2 must also be connected to your power supply for CPU power consumption to avoid causing instability to the system.

8-Pin 12V PWR JPWAKE KB/MS J4 Fan2 COM1 Pentium Dural Core JPW2 8-pin PWR Fan1 SI/O J2 Printer CPU LGA 775 COM2 PNG DIMM#1B (Blue) DIMM#2B (Black) 24-Pin ATX PWR USB J1 J6 JPUSB1 955X 3/4/5/6 USB1/2 Glenwood & LAN Audio J7 Clock (North Bridge) Battery J5 J9 Slot 7 PCI-E x1 JPF JWD Slot 6 PCI-E x16 LAN CTRL J10 PCIE-MR1 JWOR D10 FP Aud J8 Slot 5 PCI 32 bit 33MHz JP1 JP2 (South Bridge) ICH7R JF1 FP CTRL S UPER PDSG4 REV 1.011 ® AC'97 Slot 4 PCI 32 bit 33MHz PXH FPUSB7/8 J12 J B T 1 SATA0 SATA2 L E 3 CD1 Aux1 Slot 3 PCI 32 bit 33MHz JPUSB2 SATA1 SATA3 BIOS Slot 2 PCI-X 100 MHz SCSI LE2 LE1 J11 JLED JPA1 Fan3 Slot 1 PCI-X100 MH z ZCR JPL1 Fan4 Buzzer SPKR (The Green Slot) WOL JPA2 JL1 2-8 DIMM#1A (Blue) DIMM#2A (Black) IDE 1 J18 SCSI Channel Fan5