Chapter 2: Installation 2-7 Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identifi ed with a square solder pad on the printed circuit board. See the motherboard layout pages for jumper locations. Note: On two pin jumpers, "Closed" means the jumper is on and "Open" means the jumper is off the pins. GLAN Enable/Disable JPL1 enables or disables the GLAN port on the motherboard. See the table on the right for jumper settings. The default setting is enabled.
JPWAKE KB/MS J4 Fan1 Fan2 COM1 Pentium Dural Core CPU JPW2 8-pin PWR SI/O J2 COM2 Printer LGA 775 IDE 24-Pin ATX PWR J1 PNG DIMM#1A (Blue) DIMM#2A (Black) DIMM#1B (Blue) DIMM#2B (Black) USB 3/4/5/6 J6 JPUSB1 955X JPW1 USB1/2 & LAN Fan5 (North Bridge) Glenwood Audio J5 J7 Clock Battery FDD LAN CTRL J9 Slot 7 PCI-E x1 JPF JWD J17 Slot 5 PCI 32 bit 33MHz PCIE-MR1 JWOR ICH7R D10 JF1 S UPER PDSG4 REV 1.011 ® FP Aud J8 Slot 4 PCI 32 bit 33MHz JP1 JP2 PXH J B T 1 (South Bridge) FP CTRL CD1 Aux1 AC'97 Slot 3 PCI 32 bit 33MHz JPUSB2 FPUSB7/8 J12 SATA0 SATA2 SATA1 SATA3 L E 3 J18 Slot 2 PCI-X 100 MHz SCSI Channel BIOS Slot 1 PCI-X100 MH z ZCR (The Green Slot) SCSI JPA2 LAN Enable LE2 LE1 J11 JLED JPA1 Fan3 JPL1 Fan4 Buzzer SPKR WOL JL1 2-19 Slot 6 PCI-E x16 J10