Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

Chapter 2: Installation 2-9 Parallel Port, Floppy and Hard Disk Drive Connections Note the following when connecting the fl oppy and hard disk drive cables: • A red mark on a wire typically designates the location of pin 1. • A single fl oppy disk drive ribbon cable has two connectors to provide for two fl oppy disk drives. The connector with twisted wires always connects to drive B. A, and the connector that does not have twisted wires always connects to drive Parallel (Printer) Port Connector Parallel (Printer) Port Pin Definitions The parallel (printer) port is located above the COM ports. See the table on the right for pin defi nitions.

Parallel Port JPWAKE KB/MS J4 Fan1 Fan2 COM1 Pentium Dural Core CPU JPW2 8-pin PWR SI/O J2 COM2 Printer LGA 775 IDE 24-Pin ATX PWR J1 PNG DIMM#1B (Blue) DIMM#2B (Black) USB J6 JPUSB1 955X JPW1 3/4/5/6 USB1/2 (North Bridge) Glenwood & LAN Audio J7 Clock Battery FDD J5 J9 Slot 7 PCI-E x1 JPF JWD J17 LAN CTRL PCIE-MR1 JWOR D10 S UPER PDSG4 REV 1.011 ® FP Aud J8 Slot 5 PCI 32 bit 33MHz JP1 JP2 (South Bridge) ICH7R JF1 FP CTRL AC'97 Slot 4 PCI 32 bit 33MHz PXH FPUSB7/8 J12 J B T 1 J18 CD1 Aux1 Slot 3 PCI 32 bit 33MHz JPUSB2 SCSI Channel BIOS Slot 2 PCI-X 100 MHz SCSI LE2 LE1 J11 JLED JPA1 Fan3 Slot 1 PCI-X100 MH z ZCR JPL1 Fan4 Buzzer SPKR (The Green Slot) WOL JPA2 JL1 2-25 Pin Number Function Pin Number Function 1 Strobe- 3 Data Bit 0 5 Data Bit 1 7 Data Bit 2 9 Data Bit 3 11 Data Bit 4 13 Data Bit 5 15 Data Bit 6 17 Data Bit 7 19 ACK 21 BUSY 23 PE 25 SLCT 2 Auto Feed- 4 Error- 6 Init- 8 SLCT IN- 10 GND 12 GND 14 GND 16 GND 18 GND 20 GND 22 GND 24 GND 26 NC DIMM#1A (Blue) DIMM#2A (Black) Fan5 Slot 6 PCI-E x16 J10 SATA0 SATA2