Super Micro Computer, Inc. PDSG4/PDSGE — Super Micro PDSG4/PDSGE User & Service Manual PDF

PDSG4/PDSGE User's Manual C-2 Installing the Windows XP/2000/2003 for systems with RAID Functions Installing a New Operating System-the Windows XP/2000/2003 OS a. Insert Microsoft's Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD. b. Press the key when the message-" Press F6 if you need to install a third party SCSI or RAID driver" displays. c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify additional device(s). d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH7R into Drive A: and press the key. e.

Choose the Intel(R)82801GR/GH SATA RAID Controller from the list indicated in the XP/2000/2003 Setup Screen, and press the key. f. Press the key to continue the installation process. (If you need to specify any additional devices to be installed, do it at this time.) Once all devices are speci- fi ed, press the key to continue with the installation. g. From the Windows XP/2000/2003 Setup screen, press the key. The Windows XP/2000/2003 installation. XP/2000/2003 Setup will automatically load all device fi les and then, continue the h. After Windows XP/2000/2003 Installation is completed, the system will automati- cally reboot. i.

Insert Supermicro's CD that came with the package into the CD Drive during system reboot, and the following screen will appear: (*Note: the current version of the ICH7R SATA RAID Utility can only support the Windows XP/2000/2003 Operating System.) C-10