Appendix D: Adaptec HostRAID Setup Guidelines Adding a Bootable Array To make an array bootable: 1. From the Main menu, select Manage Arrays. 2. From the List of Arrays, select the array you want to make bootable, and press and . 3. Enter Y to create a bootable array when the following message is displayed: "This will make all other existing bootable array non-bootable. Do you want to make this array bootable? (Yes/No):" Then, a bootable array will be created. An asterisk (*) will appear next to the bootable array (as shown in the picture below:) Deleting a Bootable Array To delete a bootable array: 1. From the Main menu, select Manage Arrays. 2.
From the List of Arrays, select the bootable array you want to delete, and press and . Note: a bootable array is the array marked with an asterisk * (as shown in the picture above.) 3. When the following message is displayed: "The array is already marked bootable. Do you want to make this array as not bootable? (Yes/No)," Enter Y to delete a bootable array. The bootable array will be deleted and the asterisk will disap- pear. (*Note: Do not use the delete key to delete the bootable array.) D-11