PDSMA+/PDSMA-E+ User's Manual Adding/Deleting Hotspares To add a Hotspare: ( *Note : In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add a new HDD as a hotspare.) 1. From the main menu (shown on Page D-4), select Add/Delete Hotspares. 2. Use the up and down arrow keys to highlight and select the disk you want to designate as a hotspare, and press , and then, press . 3. Press Yes when the following prompt is displayed: "Do you want to create spare?" (Yes/No?) The spare you have selected will appear in the Selected drives Menu. To delete a Hotspare: 1. From the main menu (shown on Page D-4), select Add/Delete Hotspares. 2.
Use the up and down arrow keys to highlight and select the Hotspare you want to delete, and press , and then, press . 3. When the following warning is displayed: "Do you want to delete the hot spare?" (Yes/No?), press Yes to delete the hotspare you have selected. D-12