Chapter 2: Installation 8. Repeat Step 6 to insert all four heatsink fasteners into the mounting holes. 9. Once all four fasteners are securely inserted into the mounting holes and the heatsink is properly installed on the moth- erboard, connect the heatsink fan wires to the CPU Fan connector. Heatsink Removal 1. Unplug the power cord from the power supply. 2. Disconnect the heatsink fan wires from the CPU fan header. 3. Use your finger tips to gently press on the fastener cap and turn it counterclockwise to make a 1/4 (90 0 ) turn, and then pull the fastener upward to loosen it. 4. Repeat Step 3 to loosen all fasteners from the mounting holes. 5.
With all fasteners loosened, remove the heatsink from the CPU. 2-3 Mounting the Motherboard in the Chassis All motherboards have standard mounting holes to fit different types of chassis. Make sure that the locations of all mounting holes for the motherboard and the chas- sis match. Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended because they ground the motherboard to the chassis. Make sure that the metal standoffs click in or are screwed in tightly. Then use a screwdriver to secure the motherboard onto the motherboard tray. Note : some components are near to the mounting holes.
Please take all neces- sary precautionary measures to prevent damage done to these components when installing the motherboard into the chassis. Warning: To avoid damage to the motherboard, do not use more than 8lbs of torque when tightening the screws. 2-5