Super Micro Computer, Inc. PDSMA+ / PDSMA-E+ — Super Micro PDSMA+ / PDSMA-E+ User Manual: Motherboard Guide PDF

Chapter 2: Installation The PDSMA+/PDSMA-E+ has six fan headers (Fan1 to Fan6). Fan6 is desig- nated as the CPU Cooling Fan. ( *Note : all these fans are 4-pin fans. However, Pins 1-3 of the fan headers are back- ward compatible with the traditional 3-pin fans.) See the table on the right for pin definitions. *The onboard fan speeds are controlled by the Fan Speed Mode (Ther- mal Management) in the BIOS Hardware Monitoring Section. When using Thermal Management settings, please use all 3-pin fans or all 4-pin fans on the motherboard. Please do not use 3-pin fans and 4-pin fans on the same board.

The default setting is "Disabled" which will allow the onboard fans to run at the full speed.) Fan Headers USB 1/2 KB/MS COM1 VGA JLAN1 A. Fan 1 B. Fan 2 JLAN2 C. Fan 3 D. Fan 4 Fan5 E E. Fan 5 S A+/PDSMA-E+ M S D P R E P U LAN1 CTRL F. Fan 6 (CPU Fan) LAN2 CTRL ® S I/O COM2 Floppy J9 WOL JL1 SATA1 SATA3 2-17 Fan Header Pin Definitions (Fan1-5) Pin# Definition 1 Ground (Black) 2 +12V (Red) 3 Tachometer 4 PWM Control _ 4 PW 3 PW JPR1 8-pin PWR 2 R PW ATX 4-Pin A VGA CTRL DIMM 2B DIMM 1B Fan1 BIOS 1 *Compact Flash only n4 Primary IDE