PDSMA+/PDSMA-E+ User's Manual The Wake-On-Ring header is located at JWOR. This function allows your computer to be "awakened" by an incoming call to the modem when in the suspend state. See the table on the right for pin definitions. You must have a Wake-On-Ring card and a cable to use this feature. Wake-On-Ring Wake-On-LAN The Wake-On-LAN header is located at WOL. See the table on the right for pin definitions. You must enable the LAN Wake-Up function in the BIOS and also have a LAN card with a Wake-on-LAN connector and a cable to use this feature. USB 1/2 KB/MS COM1 CTRL VGA VGA JPG1 Intel 3000 A. WOR B. WOL JLAN1 North Bridge CPU LGA 775 Intel 3010 OR Fan2 JLAN2 Fan5 PCI-Exp.
x8 JWD JLED Fan3 L R T C P F S A+/PDSMA-E+ M S D P R E P U LAN1 CTRL PCI-X 64-bit 133 MHz JI2C1 JI2C2 JPF IPMI 2.0 LAN2 CTRL JPL1 PCI 32-bit 33 MHz PCI 32-bit 33 MHz PXH-V ® S I/O JPL2 PCI 32-bit 33 MHz PCI 32-bit 33 MHz L E 3 L E 4 South Bridge ICH7R COM2 Floppy PCI 32-bit 33 MHz Printer J9 WOL A B SPKR JBT1 USB3/4 USB5/6 JP3 JWOR JL1 LE1 SATA0 SATA1 SATA3 2-18 Wake-On-Ring Pin Definitions (JWOR) Pin# Definition 1 Ground (Black) 2 Wake-up Wake-On-LAN Pin Definitions (JWOL) Pin# Definition 1 +5V Standby 2 Ground 3 Wake-up 3 4PW PW JPR1 8-pin PWR 2 R PW ATX 4-Pin DIMM 2B DIMM 1B Fan1 DIMM 1A BIOS 1 *Compact Flash only n4 Primary IDE