Super Micro Computer, Inc. PDSMA+ / PDSMA-E+ — Super Micro PDSMA+ / PDSMA-E+ User Manual: Motherboard Guide PDF

PDSMA+/PDSMA-E+ User's Manual 2-7 Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identified with a square solder pad on the printed circuit board. See the motherboard layout pages for jumper locations. Note: On two pin jumpers, "Closed" means the jumper is on and "Open" means the jumper is off the pins. GLAN Enable/Disable JPL1 and JPL2 enable or disable GLAN 1 Port and GLAN 2 Port on the motherboard. See the table on the right for jumper settings. The default setting is enabled. USB 1/2 KB/MS COM1 VGA A.

GLAN1 Enable B. GLAN2 Enable JLAN1 JLAN2 S A+/PDSMA-E+ M S D P R E P U ® COM2 Floppy J9 WOL JL1 SATA1 SATA3 2-22 GLAN 1/2 Enable Jumper Settings Jumper Setting Definition 1-2 Enabled 2-3 Disabled S 8-pin PWR VGA DIMM 2B PW 4 PW 3 JPR1 PW ATX 24-Pin R 2 CTRL DIMM 1B Fan1 DIMM 2A JPG1 (CPUFan) DIMM 1A Fan6 Intel 3000 CPU IntelO 3R 010 Fan2 1 LGA 775 North Bridge CTRL 2 JLED Fan3 Fan5 FP PCI-Exp.

x8 JWD LAN1 PCI-X 64-bit 133 MHz JPF 2.0 CTRL JJII22CC21 IPMI PCI 32-bit 33 MHz PXH-V A LAN2 PCI 32-bit 33 MHz CTRL JJPPLL12 BIOS B PCI 32-bit 33 MHz LL EE 34 ICH7R JWF1 Flash only Primary IDE S I/O PCI 32-bit 33 MHz *Compact Printer South Bridge Battery PCI 32-bit 33 MHz JBT1 SPKRUSB5/6USB3/4 JP3 SATA0SATA2 LE1 n4 4 PW 3 PW JPR1 8-pin PWR 2 R PW ATX 4-Pin VGA CTRL DIMM 2B DIMM 1B Fan1 BIOS 1 *Compact Flash only n4 Primary IDE