PDSMA+/PDSMA-E+ User's Manual 2-8 Onboard Indicators Activity LED Link LED GLAN LEDs (Rear View: When viewing it from the There are two GLAN ports on the mother- board. Each Gigabit Ethernet LAN port has two LEDs. The yellow LED indicates activity, while the other LED may be green, amber or off to indicate the speed of the connec- tion. See the table at right for the functions associated with the second LED. rear side of the system) There is an Onboard Power LED (LE1) lo- cated on the motherboard. When LE1 is off, the system is off. When the green light is on, the system is on. When the yellow light is on, the system is off, but the AC power cable is still connected.
Make sure to disconnect the power cable before removing or installing components. See the layout below for the LED location. Onboard Power LED USB 1/2 KB/MS COM1 JPG1 (CPUFan) Fan6 DIMM 1A VGA A CPU Intel 3010 OR Intel 3000 Fan2 A. GLAN1 Port B. GLAN2 Port JLAN1 North Bridge JLAN2 B LGA 775 L R T C P F C. Onboard Power LED Fan5 PCI-Exp.
x8 JWD JLED Fan3 S A+/PDSMA-E+ M S D P R E P U LAN1 CTRL PCI-X 64-bit 133 MHz PCI 32-bit 33 MHz JI2C1 JI2C2 JPF IPMI 2.0 CTRL LAN2 JPL1 JPL2 PCI 32-bit 33 MHz PXH-V ® S I/O PCI 32-bit 33 MHz PCI 32-bit 33 MHz L E 3 L E 4 South Bridge ICH7R C COM2 Floppy PCI 32-bit 33 MHz Printer J9 WOL SPKR JBT1 USB3/4 USB5/6 JP3 JWOR JL1 LE1 SATA0 SATA1 SATA3 2-26 GLAN Activity LED Activity Indicator LED Color Definition Yellow Flashing:
LAN Port Active GLAN Link LED Connection Speed Indicator LED Color Definition Off 10Mbps or No Connection Green 100 Mbps Amber 1 Gbps Onboard PWR LED Indicator (LE1) LED Color Definition Off System Off Green System On Yellow System off, PWR Cable Connected 4 PW 3 PW JPR1 8-pin PWR 2 R PW ATX 4-Pin VGA CTRL DIMM 2B DIMM 1B Fan1 BIOS 1 *Compact Flash only n4 Primary IDE