PDSMi User’s Manual Figure 1-3.
Motherboard Layout (not drawn to scale) KB/MS J28 24-Pin ATX PWR JPW1 Fan6/CPU Fan 8-pin PWR Fan1 JPW2 USB 1/2 J15 Pentium Dual COM1 Core CPU J31 E7230 LGA 775 VGA Mukilteo JG1 (North Bridge) GLAN1 DIMM 1A DIMM 1 GLAN2 DIMM 2A DIMM 2 JLED Fan5 DIMM 1B DIMM 3 FP CTRL DIMM 2B DIMM 4 JF1 LAN SXB -E1 PCI-Ex8 Slot6 PCI-X 133 MHz Fan3 Fan2 CTRL JI 2 C1 JI 2 C2 JPF JWD S UPER PDSMi REV 1.0 Battery VGA BIOS PXH-V WOL JPL2 IPMI CTRL Buzzer SATA3 L E 3 ICH7R SATA2 ® S I/O L E 4 (South Bridge) SATA1 JPG1 Slot1 COM2 J9 JBT1 USB3/4 USB5/6 JWF1 JWOR SATA0 J30 J27 IDE J4 J3 IDE (Primary) PCI 32 Bit/33 MHz LE1 JL1 JP3 Fan4 Printer Floppy (*Compact Flash Card only) Important Notes to the User • All images and graphics shown in this manual were based upon PCB Rev.1.0, the latest PCB Revision available at the time of publishing of this manual.
The motherboard you've received may or may not look exactly the same as the graphics shown in this manual. • See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front- panel connections. • " " indicates the location of "Pin 1". • When the LE1 LED is on, the 5V Standby PWR is on. Maker sure to turn off the power before installing or removing components. • J4 (the white slot) is reserved for Compact Flash Card only. Do not use it for other devices. If J4 is populated with a Compact Flash Card, J3 (the blue slot) will be available for one device only; if not, J3 can be used for multiple devices. 1-4 LAN CTRL