Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

PDSMi User's Manual Discrete MTRR Allocation If enabled, MTRRs (-Memory Type Range Registers) are confi gured as distinct, separate units and cannot be overlapped. If enabled, the user can achieve better graphic effects when using a Linux graphic driver that requires the write- combining confi guration with 4GB or more memory. The options are Enabled and Disabled . u PCI Confi guration Access the submenu to make changes to the following settings for PCI devices. Onboard G-LAN1/G-LAN2 (Gigabit- LAN) OPROM Confi guration Enabling this option provides the capability to boot from GLAN. The options are Disabled and Enabled .

Default VGA Select Add-on Card if you want to use an add-on VGA card that is installed. Otherwise, select Onboard VGA to use the built-in VGA video. The options are Add-on Card and Onboard VGA. Reset Confi guration Data If set to Yes, this setting clears the Extended System Confi guration Data- (ESCD) area. The options are Yes and No . u Slot 1 PCI 32 (32-bit)/Slot 6 PCI-X 133 MHz following: Access the submenu for each of the settings above to make changes to the Option ROM Scan When enabled, this setting will initialize the device expansion ROM. The options are Enabled and Disabled. Enable Master This setting allows you to enable the selected device as the PCI bus master.

The options are Enabled and Disabled. Latency Timer This setting allows you to set the clock rate for Bus Master. A high-priority, high- throughout device may benefi t from a greater clock rate. The options are Default , 0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and other Operating Systems, please select the option: other. If a drive fails after the installation of a new software , you might want to change this setting and try again. A different OS requires a different Bus Master clock rate . 4-10