Super Micro Computer, Inc. E7230 — Super Micro E7230 Motherboard User's Manual PDF: PDSMi Guide for Integrators & Technicians

Chapter 4: BIOS Large Disk Access Mode This setting determines how large hard drives are to be accessed. The options are DOS or Other (for Unix, Novelle NetWare and other operating systems). u Advanced Chipset Control Access the submenu to make changes to the following settings. * Warning : Take Caution when changing the Advanced settings. Incor- rect values entered may cause system malfunction. Also, a very high DRAM frequency or incorrect DRAM timing may cause system instability. When this occurs, revert to the default setting.

Clock Spectrum Feature If Enabled, the BIOS will monitor the level of Electromagnetic Interference caused by the components and will attempt to decrease the interference whenever needed. The options are Enabled and Disabled . ECC Conditions This setting specifi es the ECC Error conditions that will be treated as "ECC Error Events" by the system. The options are None, Single Bit, Multiple Bit, and Both. (*Note: This item is available when it is supported by the memory.) ECC Error Handler This setting allows you to select the type of interrupt to be activated as a result of an ECC error.

The options are None, NMI (Non-Maskable Interrupt), SMI (System Management Interrupt) and SCI (System Control Interrupt.) (*Note: This item is available when it is supported by the memory.) Onboard G-LANs Enable This setting allows you to enable or disable Onboard G-LAN ports. The settings are Enabled and Disabled. Route Port 80h Cycles to The options are PCI and LPC. This feature allows the user to decide which bus to send the debug information to. USB Function If set to Enabled to enable the USB function when the user keys in a value to a USB item. The options are Enabled and Disabled. 4-11