PDSMi User's Manual Legacy USB Support settings are Enabled and Disabled. This setting allows you to enable support for the Legacy USB devices. The u Advanced Processor Options Access the submenu to make changes to the following settings: CPU Speed The feature allows the BIOS to display the CPU Speed. Frequency Ratio This feature allows the user to select the ration for the internal frequency multiplier of the CPU. The options are Default , X14, X15, and X16. Hyper-threading ( * Available when supported by the CPU.) This setting allows you to Enable or Disable the function of hyper-threading. Enabling hyper-threading results in increased CPU performance.
(Applicable for XP systems.) Machine Checking ( * Available when supported by the CPU.) Set to Enabled to activate the function of Machine Checking and allow the CPU to detect and report hardware (machine) errors via a set of model-specifi c registers (MSRs). The options are Disabled or Enabled. Intel EIST ( * Available when supported by the CPU.) This feature allows the user to use the Enhanced Intel SpeedStep Technology on this motherboard. The options are Disabled and C States Only. If set to Disabled, C States and GV1/GV3 are disabled. If set to C States only, the processor power will be controlled through CPU power states in the APCI setting.
Thermal Management 2 ( * Available when supported by the CPU.) Set to Enabled to use Thermal Management 2 (TM2) which will lower CPU voltage and frequency when the CPU temperature reaches a pre-defi ned overheat threshold. Set to Disabled to use Thermal Manager 1 (TM1), allowing CPU clocking to be regulated via CPU Internal Clock modulation when the CPU temperature reaches the overheat threshold. 4-12