PDSMi User's Manual u I/O Device Confi guration Access the submenu to make changes to the following settings. KBC Clock input This setting allows you to set the clock frequency for the Keyboard Clock. The options are 6MHz, 8MHz, 12 MHz, and 16MHz. Serial Port A This setting allows you to decide how Serial Port A is controlled. The options are Enabled and Disabled. Base I/O Address This setting allows you to select the base I/O address for Serial Port A. The options are 3F8 , 2F8, 3E8, and 2E8. Interrupt This setting allows you to set the Interrupt for Serial Port A. The options are IRQ3 and IRQ4. Serial Port B This setting allows you to decide how Serial Port B is controlled.
The options are Enabled and Disabled. Mode This feature allows the user to set the mode for Serial Port B. The options are Normal, IR (Infra-Red) and ASK-IR. Base I/O Address This setting allows you to select the base I/O address for Serial Port B. The options are 3F8, 2F8 , 3E8 and 2E8. Interrupt This setting allows you to set the Interrupt for Serial Port B. The options are IRQ3 and IRQ4. Parallel Port This setting allows you to assign control of the Parallel Port. The options are Enabled and Disabled. Base I/O Address This setting allows you to select the base I/O address for the Parallel Port. The options are 378, 278, and 3BC. 4-14