Chapter 4: BIOS Interrupt This setting allows you to set the Interrupt for the Parallel Port. The options are IRQ5 and IRQ7 . Mode This feature allows the user to set the mode for the Parallel Port. The options are Output Only, Bi-Directional, EPP, and ECP . DMA Channel This feature allows the user to select the DMA Channel for the Parallel Port. The options are DMA1 and DMA3 . Floppy Disk Controller This setting allows you to assign control of the fl oppy disk controller. The options are Enabled (user defi ned), Disabled, and Auto (BIOS and OS controlled). Base I/O Address Select the base I/O address for the parallel port. The options are Primary and Secondary.
u DMI Event Logging Access the submenu to make changes to the following settings. Event Log Validity This is a display to inform you of the event log validity. It is not a setting. Event Log Capacity This is a display to inform you of the event log capacity. It is not a setting. View DMI Event Log Highlight this item and press to view the contents of the event log. Event Logging This setting allows you to Enable or Disable event logging. ECC Event Logging This setting allows you to Enable or Disable ECC event logging. Mark DMI Events as Read Highlight this item and press to mark the DMI events as read. 4-15