Super Micro Computer, Inc. PDSML-LN1+/PDSML-LN2+/PDSML-E+ — Super Micro PDSML-LN1+/LN2+/E+ Motherboard User Manual PDF

Chapter 2: Installation VGA Connector to the COM1 port on the IO backplane. A VGA connector (JG1) is located next Refer to the board layout below for the location. Power LED The Power LED connector is desig- nated JLED. This connection is used for 3-pin LED applications. It is used to indicate that power has been sup- plied to the system. See the table on the right for pin defi nitions. For 2-pin power LED, please see Power LED on page 2-9. 24-Pin ATX PWR Fan6 CPU Fan PWR Fault PWR SMB JPR1 Fan1 8-pin PWR A. VGA LAN CTRL2 B.

PWR LED (*LN2+) JPL2 JPL1 Intel LGA 775 CPU North Bridge 3000/3010 S UPER PDSML-LN1+/LN2+/E+ ® DIMM 2A DIMM 1A Fan2 DIMM 1B Fan3 JPF FP CTRL VGA Memory JI 2 C2 JI 2 C1 DIMM 2B JF1 IPMI Slot6 SBX: PCI-33 MHz VGA CTRL PCI-E x8 J8 IDE J10 PCI-E x4 Slot5 JWOR BIOS LE3 Battery ICH7R JL1 SATA3 S I/O PCI1 Slot4 PCI-33 MHz JPG1 SPKR r e z z u B LE4 LE1 South Bridge JBT1 SATA1 JLED B 4 n a F WOL COM2 Floppy USB3/4 USB5/6 SATA0 SATA2 2-19 PWR LED Pin Defi nitions Pin# Defi nition 1 +5V 2 Key 3 Ground K B/MS U COM1 VGA JLAN1 JLAN2 (*LN2+) Fan5