philips — Troubleshooting

Troubleshooting file:///D|/J/english/200p4/safety/saf_troub.htm (1 of 3) [8/28/03 4:32:11 PM] •S afety and Troubleshooting •F AQs •C ommon Problems •I maging Problems •R egulatory Information •O ther Related Information Troubleshooting This page deals with problems that can be corrected by the user. If the problem still persist after you have tried these solutions, contact your nearest Philips dealer. Common Problems Having this problem? Check these items G Make sure the Power cable is plugged to the wall and the back of the monitor. No Picture G Firstly, ensure that the , power button in front (Power LED not lit) of the monitor is in the OFF position, then press it to the ON position again.

G Make sure the computer is turned on. No Picture G Make sure the signal cable is properly connected to your computer. G Check to see if the monitor cable has bent (Power LED is amber or yellow) pins. G The Energy Saving feature may be activated Screen says G Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide). G Check to see if the monitor cable has bent pins. G Make sure the computer is turned on. G The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. AUTO button not working properly G It may not work properly if using nonstandard PC or video card.

Imaging Problems Common Problems Having this problem? Check these items G Make sure the Power cable is plugged to the wall and the back of the monitor. No Picture G Firstly, ensure that the , power button in front (Power LED not lit) of the monitor is in the OFF position, then press it to the ON position again. G Make sure the computer is turned on. No Picture G Make sure the signal cable is properly connected to your computer. G Check to see if the monitor cable has bent (Power LED is amber or yellow) pins. G The Energy Saving feature may be activated Screen says G Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide).

G Check to see if the monitor cable has bent pins. G Make sure the computer is turned on. G The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. AUTO button not working properly G It may not work properly if using nonstandard PC or video card. Imaging Problems