Note D for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS” • The range of input numbers is between 0 and 255. 5. “Encryption Key” screen will appear. Enter the Encryption Key of the selected Wireless LAN network using cursor buttons, number buttons and color key. • If you enter a number larger than 255, the number will automatically be reset to 255. • If you do not know the Encryption Key for your Wireless LAN network, ask your ISP or the person who set up your Wireless LAN Network. Note D for “Proxy Address” and “Proxy Port” • The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.) Encryption Key (Password) • For proxy port, certain ports might be closed, blocked or unusable depending on your network environment. • Choose a connection speed in accordance with your network environment. • When the settings are changed, the network connection may be disabled depending on the device. Symbols Alphanumeric Other Characters C Wireless 6. Use [ K / L / 0 / 1 ] to select “Finish”, then press [OK] . Please make a note of your Wireless LAN network name (SSID) and its WEP / TKIP+AES key before proceeding with the setup. 7. Confirmation screen will appear. Press [OK] . 8.
The connection result screen will appear. Press [OK] . • Network configuration will start automatically. Easy Network Setting Search for Wireless LAN networks automatically and select the Wireless LAN network name (SSID) from the list. 1. Press [ Q (home)] and select “Setup” “Player Settings” “Network”, then press [OK] . Note D • The internal wireless LAN supports following specifications 2. Use [ K / L ] to select “Easy Network Setting”, then press [OK] . Wireless LAN standards : IEEE 802.11 b / g / n / ac Frequency spectrum: 2.4 / 5 GHz Security protocol:
WEP / TKIP+AES (Strong) / TKIP+AES (Weak) • With a 2.4GHz wireless router (access point), using a USB3.0 compatible device with this unit may cause wireless connection instability. Place the wireless router as far away as possible from this unit. 3. Use [ K / L ] to select “Wireless”, then press [OK] . • This unit will start searching for Wireless LAN networks automatically. 4. The result of Wireless LAN network searching will be displayed. Use [ K / L ] to select the appropriate Wireless LAN network name (SSID), then press [OK] . • When using a 5GHz compatible wireless router (access point), 5GHz bandwidth use is recommended. • If you select an SSID without “ ”, please go to step 7.
Wireless Settings Select a wireless network for connection. Press the green button to connect via Easy Connect (PUSH button method). Network name (SSID) Reception xxxxxxxxxx xxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxx xxxxxxxx Search again Easy Connect (PUSH) EN 45 Shift 1 2 3 4 5 6 7 8 9 0 Delete q w e r t y u i o p Finish a s d f g h j k l . z x c v b n m @ * # Space / : _ - , ; ‘