Network Settings Easy Connect Set up the connection to the Wireless LAN network manually by entering the Wireless LAN network name (SSID). You can set up the Wireless LAN connection quickly. (Easy Connect is only available when your router supports it. For details, please refer to the user manual of your Wireless LAN router.) 1. Press [ Q (home)] and select “Setup” “Player Settings” “Network”, then press [OK] . Push Button Method 2. Use [ K / L ] to select “Network Settings”, then press [OK] . Please confirm your Wireless LAN router has a PBC button. 3. Use [ K / L ] to select “Wireless”, then press [OK] . 1. Press [ Q (home)] and select “Setup” “Player Settings” “Network”, then press [OK] .
4. Use [ K / L ] to select “Wireless Settings”, then press [OK] . 2. Use [ K / L ] to select “Easy Network Setting”, then press [OK] . 5. Use [ K / L ] to select “Manual Setting”, then press [OK] . 3. Use [ K / L ] to select “Wireless”, then press [OK] . 6. “SSID” screen will appear. Enter the SSID using cursor buttons, number buttons and color key. 4. Use [ K / L ] to select the appropriate Wireless LAN network name (SSID), then press [GREEN] . 7. Use [ K / L / 0 / 1 ] to select “Finish”, then press [OK] . Wireless Settings Select a wireless network for connection. Press the green button to connect via Easy Connect (PUSH button method). 8. Encryption type selection screen will appear.
Select the Encryption type of the entered SSID, then press [OK] . Network name (SSID) Reception • If you select “No encryption”, please go to step . • If you select “AES”, select “TKIP+AES (Strong)” or “TKIP+AES (Weak)”, then press [OK] . xxxxxxxxxx xxxxxxxxxxxxxx xxxxxxxxxxxx xxxxxx xxxxxxxx Wireless Settings Select the encryption type. AES WEP Search again Easy Connect (PUSH) No encryption 5. Push the PBC (Push Button Configuration) on your Wireless LAN router. 9. “Encryption Key” screen will appear. Enter the Encryption Key of the Wireless LAN network using cursor buttons, number buttons and color key. 6. Select “Start”, then press [OK] .
• The unit will start the connection test automatically and the test result will appear right after the connection test finishes. • If you do not know the Encryption Key for your Wireless LAN network, ask your ISP or the person who set up your Wireless LAN Network. 7. The connection result screen will appear. Press [OK] . 10. Use [ K / L / 0 / 1 ] to select “Finish”, then press [OK] . 11. The connection result screen will appear. Press [OK] . EN 46