philips BDP7501 — EasyLink Setup

PIN Code Method 11.4. EasyLink Setup 1. Press [ Q (home)] and select “Setup” “Player Settings” “Network”, then press [OK] . Q (home) “Setup” “Player Settings” “System” “Display Settings” “Easy Link” 2. Use [ K / L ] to select “Network Settings”, then press [OK] . 3. Use [ K / L ] to select “Wireless”, then press [OK] . This unit supports Philips EasyLink, which enables your TV (limited to Philips brand EasyLink TV) to act in conjunction with this unit, or vice versa. Compliant TV must be connected to the HDMI OUT jack. 4. Use [ K / L ] to select “Wireless Settings”, then press [OK] . When “EasyLink” setting is set to “On”, functions listed below will be available. 5.

Use [ K / L ] to select “Easy Connect (PIN code method)”, then press [OK] . One Touch Play 6. Use [ K / L ] to select the appropriate router, then press [OK] . When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel. (“One Touch Play” can be turned off by setting it to “Off”.) 7. Set up your Wireless LAN router with PIN code shown on the TV screen. • For details about setting method of your Wireless LAN router, please refer to the user manual of the router. Buttons for one touch play: [ B (play)] [TOP MENU] (when a disc is inserted in the unit) 8.

Select “Start”, then press [OK] . 9. The unit will start the connection test automatically and the test result will appear right after the connection test finishes. System Information Get & Set Menu Language The unit recognizes the OSD language set of the TV, and automatically sets the same language as the player menu language (OSD menu language) for this unit. • This function is only available when this unit supports the language set on the TV. 10. The connection result screen will appear. Press [OK] . C Netflix ESN You can view the ESN number which is a serial number used by Netflix to identify a device. Netflix customer service might ask you for this number during troubleshooting. 1.

Use [ 0 / 1 ] to select “Setup” in the home menu, then press [OK] . 2. Use [ K / L ] to select “Player Settings”, then press [OK] . 3. Use [ K / L ] to select “System”, then press [OK] . 4. Use [ K / L ] to select “System Information”, then press [OK] . 5. Use [ K / L ] to select “Firmware Version Information”, then press [OK] . 6. Press [ Q (home)] to exit. EN 47