Connecting the antenna or cable If you connect a set-top box through RF IN / OUT If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 or 4, or to the channel specifi ed by the service provider. English Cable Cable OUT RF CABLE RF CABLE IN IN IN OUT IN IN IN RF CABLE RF CABLE Set-top box Set-top box IN If you connect to an antenna Any DTV programs that are broadcast in your area can be received for free through an antenna connection. If you connect a set-top box through HDMI Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.
If the TV is connected to a cable box or satellite set-top box via HDMI, make sure you select the correct HDMI source by using SOURCE on this unit's remote control. Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time. The TV produces stereo sound only if a stereo signal is broadcast. If you connect to a cable When your TV is connected to the cable socket, you might receive free digital and high defi nition programs (depending on your cable provider). The channel number for digital and high defi nition channels includes a dot “•”.
For example, 11.1, 46.30, 108.201. Contact your cable provider for more information. HDMI HDMI HDMI IN IN IN RF CABLE RF CABLE If you connect to a DBS (Direct Broadcast Satellite) OUT There are two main DBS systems : DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV. The set-top box contains a digital TV tuner for receiving off-air digital broadcasts. Set-top box Set-top box IN Contact your local DBS provider for more information about the connections and the TV channels.
If you connect a set-top box through component video input If the TV is connected to a cable box or satellite set-top box via component video input, make sure you select the correct component video source by using SOURCE on this unit's remote control. If you connect to a set-top box A cable box or satellite set-top box can be connected to the TV through the following connections : ANT A/V (Composite Video and Audio) YPbPr (Component Video Input) HDMI For information about how to connect a set-top box, see the Quick Start Guide provided. RF CABLE RF CABLE Set-top box Set-top box IN IN IN OUT OUT OUT IN IN IN YPbPr OUT IN AUDIO L/R EN 9