philips 40PFL5705DV, 46PFL5705DV — Installing the remote control batteries

4 Get started Positioning the TV Supplied accessories Remote Control 2 x AAA, 1.5V Batteries M5 x 20 double sems screw x 4 (available for 40” and 46” only) AC Power cord Cable management tie USB wireless LAN adapter (PH2010A) User Manual Quick Start Guide Box-inserts In addition to reading and understanding safety instructions, consider the following before positioning your TV : Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power. If the TV is mounted on a swivel base, ensure that no strain is placed on the AC power cord when the TV is swiveled. Strain on the AC power cord can loosen connections.

The ideal viewing distance for watching TV is three times its screen size. Position the TV where light does not fall on the screen. Connect your devices before you position the TV. Using a Kensington lock There is a Kensington security slot on the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. Mounting stand onto TV for 40” and 46” Applicable to TVs without mounted stands. 1 AC IN Adjusting the swivel angle You can adjust the viewing angle of your TV. Top of the unit approx. approx. 15° 15° approx. approx. 15° 15° approx. approx. 15° 15° approx. approx.

15° 15° 2 Installing the remote control batteries 1 Slide the battery cover off the back of the remote control. 2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and − ends of the batteries line up with the markings inside the case. 3 Slide the cover back into position. x 4 Note To wall mount the TV, refer to the addendum. If you lose the stand mounting screws, please purchase 4 Phillips head screws (M5Ч20 ) at your local store. 8 EN Warning • Do not insert the AC power cord into the power socket outlet before all the connections are made. • Large screen TVs are heavy. 2 people are required to carry and handle a large screen TV.

• Before you move the TV, disconnect attached cables to prevent damage to connectors. Note Wireless LAN Adapter for Philips models : 55PFL57 05DV, 46PFL5 705DV, 40PFL5 705DV • This wireless device can only be used with a limited number of Philips products. For more details go to: www.philips.com/welcome and enter your model number. • Do not use the supplied USB wireless LAN adapter with devices other than this unit and a limited number of Philips products. • The supplied USB wireless LAN adapter is guaranteed by manufacturer. Caution • While adjusting the swivel angle of your TV, hold the base fi rmly to prevent the TV from tipping over and falling down.

Note • Remove the batteries if not using the remote control for an extended period of time.