Sleeptimer You can always put your TV in standby mode earlier or reset the sleeptimer during the countdown. Picture Sound Press SLEEP to set the sleep timer. Setup Sleep timer display appears on the TV screen. Sleep Off Features Language Press SLEEP repeatedly to change the amount of time (in increments of 30 minutes up to 120 minutes). USB Back BACK 3 Press О or п and then press OK repeatedly to switch between blocked and not blocked. A box with indicates that the channel or input source is blocked. An empty box indicates that the channel or input source is not blocked. 4 Press MENU to exit. View / Block Select OK Each press of SLEEP will increase the time by 30 minutes.
After setup, the sleep timer display can be called up for checking by pressing SLEEP . Using the TV ratings lock Your TV is equipped with a V-chip that allows you to control access to individual programs based on their age rating and content rating. The program content advisory data are sent by the broadcaster or by the program provider. If you receive channels through a set-top box or cable box connected by HDMI, you cannot use the TV ratings lock. Your set-top box or cable box must be connected through RF or AV connectors. 1 Press MENU on the remote control and select [Features] > [Child Lock] > [US TV ratings lock] .
2 Press О or п or Н or Ж and then press OK repeatedly to switch between blocked and not blocked. Each rating has a box-graphic in front of it to indicate whether programs carrying that rating are locked: A box with indicates that all items in the content ratings list are blocked. An empty box indicates that no items in the content ratings list are blocked. An empty box indicates that some content ratings are deselected. For example, for rating TV-14, you can deselect one or more of the following content ratings: [D] (Dialog) , [L] (Language) , [S] (Sex) , or [V] (Violence) .
Child and rating locks You can prevent your children from watching certain programs or certain channels by locking the TV controls and by using ratings. Setting your PIN 1 Press MENU on the remote control and select [Features] > [Child Lock] . 2 Enter a 4-digit PIN on the Number buttons , of the remote control. If you have not set up your PIN , enter 0000 . Changing your PIN 1 Press MENU on the remote control and select [Features] > [Child Lock] > [Change PIN] . 2 Enter a 4-digit PIN on the Number buttons of the remote control. If you have a PIN , enter your current PIN . If you do not have a PIN, enter 0000 .
If you have forgotten your PIN , unplug the AC power cord for 10 seconds to restore the PIN to 0000 . 3 Enter your PIN again to confi rm. 4 Press MENU to exit. Locking a channel or input source This section describes how to lock input sources or specifi ed channels. The channels can be selected but the screen is blanked out and the audio is muted. 1 Press MENU on the remote control and select [Features] > [Child Lock] > [Channel Lock] . 2 Enter your PIN (see ‘Setting your PIN’ on page 18). When you block a rating, all ratings in the younger age categories are automatically blocked. 3 Press MENU to exit. 18 EN Video 1 Video 2 Component HDMI 1 HDMI 2 HDMI 3 Sleep 120min.
Tip To Cancel the Sleep Timer • Press SLEEP repeatedly until “Sleep Off” is displayed on the TV screen. Picture Sound TV-MA Setup TV-14 Features TV-PG Language TV-G USB TV-Y7 TV-Y FV V S L D V-MA V-14 V-PG V-G V-Y7 V-Y Select OK View / Block BACK Back