SPECIFICATIONS 96 Phoenix 200 Maximum Weight Capacity 215 lbs. (98 kg) (includes weight of operator, cargo and accessories) Dry Weight 395 lbs. (179 kg) Fuel Capacity 2.5 gal. (9.5 l) Engine Oil Capacity 41 oz. (1200 ml) Transmission Oil 18.6 oz. (550 ml) Rear Gearcase Oil 4 oz. (120 ml) Rear Rack Capacity 70 lbs. (31.7 kg) Hitch Tongue Weight Capacity 30 lbs. (13.6 kg) (Rear rack weight and tongue weight not to exceed 30 lbs./13.6 kg) Hitch Towing Weight Capacity 300 lbs. (136 kg) Overall Length 65 in. (165 cm) Overall Width 42 in. (106.7 cm) Overall Height 42 in. (106.7 cm) Wheelbase 45 in. (114.3 cm) Ground Clearance 5.7 in. (14.5 cm) Minimum Turning Radius 65 in.
(165.1 cm) unloaded Engine Type 4-Cycle, Single Cylinder Lubrication Wet sump Engine Cooling Air Displacement 196 cc Bore x Stroke 65 x 59 Alternator Output 210w @5000 rpm Compression Ratio 9.2:1 Full Stroke Carburetor 1 / 22 mm (VM Type) Pilot Jet 40 Main Jet 98 Air Screw 1 Turn Out Jet Needle 2MKNN-4 clip Ignition System DC CDI Ignition Timing 32q +/- 2q @ 3000 RPM Spark Plug / Gap NGK CR6HSA / 0.6-0.7 mm Driving System Type Constant Variable Transmission (CVT) Shift Type Side Lever (F/N/R) Drive Ratio, Front N/A Tires, Front 21x7-10 / 4 psi (27.6 kPa) Tires, Rear 20x10-9 / 4 psi (27.6 kPa) Front Suspension Dual A-Arm w/7 in. (17.8 cm) travel Rear Suspension Mono-Shock Swing Arm w/6.5 in.
(16.5 cm) travel