Mitsubishi — 12.1.1 Function of Symbols

12 POU Editing Mode 12.1.1 Function of Symbols Users can declare and define the symbols by local symbol table and global symbol table. Local symbols are applicable for the current editing window and global symbols are applicable for all POUs in the program. „ Local Symbols: POU function operates in both Program and Function Blocks. Therefore, local sy mbols exist in both editing windows of program (O100, Pn subroutine, OXn subroutine) and function blocks. However, usage of local symbols differs in the two editing windows and is explained below. 1. Local symbols in Program: (1) Only VAR is available for Class and the setting is only for internal use of current program.

(2) All columns of Address should be filled. 2. Local symbols in Function Blocks (1) VAR, INPUT, OUTPUT and INOUT are available for the column of Class. VAR: available only in current function block. INPUT: stores the input data of current function block OUTPUT: stores the output data of current function block INOUT: operates the input data and output the data after the calculation. (2) The column of Address can be blank. (3) When INPUT or OUTPUT is specified as the Class of symbols, the function block will utilize the symbols as the input or output interface as the diagram below. DVP-PM Application Manual 12-2