Mitsubishi — 13.5 Explanations on Control Registers

13 CANopen Communication Card CRn00 : Node ID [Explanations] Display the Node ID of servo drive on CANopen. Node ID = 1: CR#100 = 1 Node ID = 2: CR#200 = 2 Node ID = 3: CR#300 = 3 Node ID = 4: CR#400 = 4 CRn01~CRn02 : Manufacturer ID [Explanations] Display the manufacturer ID of the ASDA-A2 in DWORD format. CRn03~CRn04 : Product ID [Explanations] Display the product ID of the ASDA-A2 in DWORD format. CRn05~CRn06 : Firmware version [Explanations] Display the firmware version of the ASDA-A2 in DWORD format. CRn07~CRn08 : Product type [Explanations] Display the product type of the ASDA-A2 in DWORD format. CRn09 :

CANopen node communication status [Explanations] Display the node communication status on CANopen. Please refer to the table below. CRn10 : Emergency error code [Explanations] Display the error code defined by CANopen protocol when error occurs on certain node. DVP-PM Application Manual 13-11 Status Value Disconnected H’1 Connected H’2 Operation mode H’5 Error H’6 Resetting H’7