Mitsubishi — 3.10 Special Auxiliary Relays [M], Special Data Register [D]

3 Functions of Devices in DVP-PM DVP-PM Application Manual 3-31 OFF MANU AUTO Special Page Function 10M 20D 20M Attrib.

Latched Default Ø Ø Ø D number ON AUTO MANU D1967 Accumulated error value on Y axis (High word) ╳ ○ ○ - - - R NO 0 D1968 e The max accumulated error value on Y axis (Low word) ╳ ○ ○ - - - R NO 0 D1969 The max accumulated error value on Y axis (High word) ╳ ○ ○ - - - R NO 0 D1976* Parameter setting of Z axis ○ ╳ ○ - - - R/W YES 0 3-50 D1978 Pulses per revolution (PPR) at Z axis (low word) ○ ╳ ○ - - - R/W YES 2,000 - D1979 Pulses per revolution (PPR) at Z axis (high word) Displacement per revolution (DPR) of motor at Z axis D1980 (low word) ○ ╳ ○ - - - YES 1,000 - Displacement per revolution (DPR) of motor at Z axis D1981 (high word) D1982 Maximum speed on Z axis:

V (low word) MAX ○ ╳ ○ - - - R/W YES 500K - D1983 Maximum speed on Z axis: V (high word) MAX D1984 Bias speed of Z axis: V (low word) BIAS ○ ╳ ○ - - - R/W YES 0 - D1985 Bias speed of Z axis: V (high word) BIAS D1986 JOG speed of Z axis: V (low word) JOG ○ ╳ ○ - - - R/W YES 5,000 - D1987 JOG speed of Z axis: V (high word) JOG D1988 Zero return speed of Z axis: V (low word) RT ○ ╳ ○ - - - R/W YES 50K - D1989 Zero return speed of Z axis: V (high word) RT Zero return deceleration speed of Z axis: V (low CR D1990 word) ○ ╳ ○ - - - R/W YES 1,000 - Zero return deceleration speed of Z axis:

V (high CR D1991 word) D1992 Number of Zero point signals (PG0) on Z axis:N ○ ╳ ○ - - - R/W YES 0 - D1993 Number of pulses for zero return on Z axis: P ○ ╳ ○ - - - R/W YES 0 - D1994 Definition of zero point on Z axis: HP (low word) ○ ╳ ○ - - - R/W YES 0 - D1995 Definition of zero point on Z axis: HP (high word) D1996 Acceleration time of Z axis: T ACC ○ ╳ ○ - - - R/W YES 500 - D1997 Deceleration time of Z axis: T DEC ○ ╳ ○ - - - R/W YES 500 - Target position (I) of Z axis: P(I) (low word) ○ ○ ○ 0 - - R/W NO 0 - D1998 PWM pulse width setting on Z axis (low word) ○ ╳ ╳ 0 - - R/W NO 0 - Target position (I) of Z axis:

P(I) (high word) ○ ○ ○ 0 R/W NO 0 - D1999 PWM pulse width setting on Z axis (high word) ○ ╳ ╳ 0 R/W NO 0 - D2000 Operation speed (I) of Z axis: V(I) (low word) ○ ╳ ○ 1000 - - R/W NO 1,000 - D2001 Operation speed (I) of Z axis: V(I) (high word Target position (II) of Z axis: P(II) (low word) ○ ○ ○ 0 - - R/W NO 0 - D2002 PWM cycle setting on Z axis (low word) ○ ╳ ╳ 0 - - R/W NO 0 - Target position (II) of Z axis: P(II) (high word) ○ ○ ○ 0 - - R/W NO 0 - D2003 PWM cycle setting on Z axis (high word) ○ ╳ ╳ 0 - - R/W NO 0 -