8 Check that the printing zone, including the cutter guide, the paper path, and the area where the printhead carriage is parked, is clear and clean; remove any paper powder by brushing it away or with a vacuum cleaner. CAUTION The area where the printhead carriage is parked can get quite dirty; be careful not to get ink on your hands. 9 Close the window and switch on the printer. Removing Jammed Paper 5 6 Carefully remove any of the jammed paper which you can easily lift up and out from the top of the printer. 7 Carefully pull the rest of the roll or sheet down and out of the printer. You may need to cut the edge of the roll with scissors.
5 If necessary, lift the blue paper lever, to release any trapped paper. Remember to lower it again when you have finished.