printer. Try disabling the cutter from the 14 You are strongly recommended to use the Align Printheads procedure (see page 42 on the reverse of this Pocket Guide ) after clearing a paper jam, as the problem may have caused the printheads to be Printheads → Standard alignment.) Note that you do not have to interpret the patterns printed by the Printhead Alignment routine. front panel; use → Cutter → Off . misaligned. (Select → Align 6 Removing Jammed Paper 11 Press the Form Feed and Cut key on the front panel to eject any small pieces of paper that are still in the paper path. 12 Reload the paper as normal.
If you are using roll paper you may need to trim the edge first, to ensure that it is straight. Note If there is still paper left in the paper path, try loading a sheet of stiff or rigid paper into the printer, such as heavy coated or matte film; this will help to force out any paper jammed in the paper path. 13 If the cutter seems to be causing the 10 Wait for the printer to finish initializing. problem, check in the User’s Reference Guide on the Using Your Printer CD that the type of paper is supported by the