PP80B Manual

页 1

Accessories and Features Frequency Compensation Before taking any measurements using a probe, first check the compensation of the probe and adjust it to match the channel Probe is provided with several accessories designed to make probing and measurement simper. Please take a moment to familiarize yourself with these accessories and their uses. inputs. Most oscilloscopes have a square wave reference signal available at a terminal on the front panel used to compensate the probe. Connect the probe to the signal source on your oscilloscope. Set the probe to 10X position. Adjust trimmer until seeing flat-top square wave on the display. Incorrect Incorrect Voltage vs Frequency Ground Lead:

Use the alligator clip to attach the probe to a ground reference. Correct Rating Curve Slide Switch: Use the slide switch to set probe attenuation. 800V : 600V 10X NX Ww) =© 400Vv > Compensation Trimmer: For frequency compensation adjustment in 10X mode. BNC Connector: Connect to the oscilloscope measuring channel. N 200V 0 1X 4MHz De 10MHz Adjustment Tool: Use the adjustment tool for probe compensation adjustments. 200MHz = 300MHz Ground Spring: Provides shorter grounding path for better signal integrity. Frequency A Review this user manual carefully to avoid injury and prevent damage to this Locating Sleeve:

Using locating sleeve could ensure the stability and reliability of the tip exposed to the test point. product or any products connected to it. To avoid potential hazards, use this product only as specified. Av The measurement category of a combination of a PROBE ASSEMBLY and an accessory is the lower of the measurement categories of the PROBE ASSEMBLY and of the accessory. /A\ If the PROBE ASSEMBLY is used in a manner not specified by the manufacturer, the protection provided by the PROBE ASSEMBLY may be impaired. BNC Adapter :Realize the mutual conversion of signal : Marker Rings: Attach the matched color rings onto the probe cable and shaft to identify different channels.

Page 1

页 2

Probe Characteristics User’s Model PP80B PP150B PP200B Bandwidth B0MHz 150MHz | 200MHz | 300MHz Rise time 4.3ns 2.3ns 1.75ns PP300B 1X&10X Input Resistance 1MQO/10MQ+2% Input Capacitance 1X:85pF-120pF/10X:18.5pF-22.5pF 1X:200V&10X:600V Compensation Range 10pF~35pF Storage Environment -20~60°C , 0~90%RH Size 130+2cm Weight About 52.5g Description Quantity 1 Retractable Hook Tip 1 2 Adjustment Tool 1 3 Locating Sleeve 2 , Marker Rings 8 5 Ground Lead 1 7 Hz LK PP150B PP200B 150MHz 200MHz UO PPSOOB SOOMHZ Kit Item Ground Spring 80M 8pF~30pF 0~50°C , O~80%RH 6 PP80B Working Voltage(V,.,) Operation Environment Accessory U ide CJ 1.15ns Attenuation Ratio Maximum Input Hantek’ G (Above 100MHz) 1 BNC Adapter (Above 200MHz) 1 Note:

content of this document are subject to change without notice. 1X&10X Oscilloscope Probe C €

Page 2