• Enable HTTP debug logs to view the HTTP response code from the web server. • If Stateless Address Auto-Configuration (SLAAC) addresses are not generated, there is no router that is providing IPv6 RA messages. iPXE boot for IPv6 can still work but only with link or site-local addresses. Additional References for iPXE Related Documents Standards and RFCs Technical Assistance Feature Information for iPXE The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train.
Unless noted otherwise, subsequent releases of that software release train also support that feature. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn . An account on Cisco.com is not required. Provisioning Additional References for iPXE Related Topic Document Title Programmability commands Programmability Command Reference, Cisco IOS XE Everest 16.6.1 Standard/RFC Title RFC 3315 Dynamic Host Configuration Protocol for IPv6 (DHCPv6) RFC 3986 Uniform Resource Identifier (URI):
Generic Syntax Description Link The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. http://www.cisco.com/support Programmability Configuration Guide, Cisco IOS XE 17.16.x 99