cisco IOS XE 17.16.x — Verifying the gNMI Dial-Out Using gRPC Tunnel Service Configuration

Verifying the gNMI Dial-Out Using gRPC Tunnel Service Configuration Use the following command to verify the state of the gRPC tunnel service interface: Device# show gnxi state detail Settings ======== Server: Enabled Server port: 50052 Secure server: Enabled Secure server port: 9339 Secure client authentication: Disabled Secure trustpoint: gnoi_pyats Secure client trustpoint: Secure password authentication: Disabled GNMI ==== Admin state: Enabled Oper status: Up State: Provisioned gRPC Server ----------- Admin state: Enabled Oper status: Up Configuration service --------------------- Admin state: Enabled Oper status: Up Telemetry service ----------------- Admin state: Enabled Oper status:

Up GNOI ==== Cert Management service ----------------- Admin state: Enabled Oper status: Up OS Image service ---------------- Admin state: Enabled Oper status: Up Model-Driven Programmability Verifying the gNMI Dial-Out Using gRPC Tunnel Service Configuration Command or Action Purpose Step 9 source-vrf VRF-name Example: Device(config-destination)# source-vrf Mgmt-vrf Configures a source Virtual Routing and Forwarding (VRF) instance when connecting to the tunnel server or destination. Step 10 end Example: Device(config-destination)# end Exits destination configuration mode and returns to privileged EXEC mode. Programmability Configuration Guide, Cisco IOS XE 17.16.x 300