cisco IOS XE 17.16.x — Feature Information for gNMI Dial-Out Using gRPC Tunnel Service

Supported: Supported Factory Reset service --------------------- Admin state: Enabled Oper status: Up Supported: Supported GRPC Tunnel =========== Admin state: Enabled Oper status: Up Use the following command to display the statuses of all the currently configured gRPC tunnel servers: Device# show gnxi grpctunnel destinations All configured destinations Destination Name: foobar Target: GNMI_GNOI Tag: 1 Registered: Yes Session Started: Yes Tunnel Active: Yes Error: Destination Name: example Target: GNMI_GNOI Tag: 1 Registered: Yes Session Started: Yes Tunnel Active: Yes Error:

Feature Information for gNMI Dial-Out Using gRPC Tunnel Service The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature. Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn . An account on Cisco.com is not required.

Model-Driven Programmability Feature Information for gNMI Dial-Out Using gRPC Tunnel Service Programmability Configuration Guide, Cisco IOS XE 17.16.x 301