C H A P T E R 15 In-Service Model Update This module describes how to update the YANG data models on a device through an In-Service Model Update. Restrictions for In-Service Model Update, on page 383 Information About In-Service Model Update, on page 383 How to Manage In-Service Model Update, on page 386 Configuration Examples for In-Service Model Updates, on page 387 Feature Information for In-Service Model Update, on page 391 Restrictions for In-Service Model Update • High availability or In-Service Software Upgrade (ISSU) is not supported. After a switchover, users must install the Software Maintenance Update (SMU) on standby device.
Information About In-Service Model Update Overview of In-Service Model Updates In-Service Model Update adds new data models or extend functionality to existing data models. The In-Service Model Update provides YANG model enhancements outside of a release cycle. The update package is a superset of all existing models; it includes all existing models as well as updated YANG models. The data model infrastructure implements the YANG model-defined management interfaces for Cisco IOS XE devices. The data model infrastructure exposes the NETCONF interface northbound from Cisco IOS XE devices.
The supported data models include industry standard models such as IETF, and Cisco IOS XE device-specific models. The functionality provided by the In-Service Model Update is integrated into the subsequent Cisco IOS XE software maintenance release. Data model update packages can be downloaded from the Cisco Download Software Center . Compatibility of In-Service Model Update Packages An update package is built on a per release basis and is specific to a platform. This means that an update package for Cisco ASR 1000 Series Aggregation Services Routers cannot be installed on Cisco CSR 1000V Programmability Configuration Guide, Cisco IOS XE 17.16.x 383