cisco IOS XE 17.16.x — Installing the Update Package

Series Cloud Services Routers. Similarly, an update package built for Cisco IOS XE Fuji 16.7.1 cannot be applied on a device that runs the Cisco IOS XE Everest 16.5.2 version. All contents of an update package will be part of future mainline or maintenance release images. The image and platform versions are checked by the In-Service Model Update commands during the package add and activate. If an image or platform mismatch occurs, the package install fails. Update Package Naming Conventions In-Service Model Updates are packaged as a .bin files. This file includes all updates for a specific release and platform and the Readme file.

These files have a release date and are updated periodically with additional model updates. The naming convention of the data model update package follows the format—platform type-license level.release version.DDTS ID-file. The following is an example of a data model update file: • isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin • asr1000-universalk9.2017-08-23_17.48.0.CSCxxxxxxx.SSA.dmp.bin The readme file provides the following information:

• Console and error messages during data model activation or deactivation • Data model installation impact • Side effects and possible workarounds • Package(s) that the In-Service Model Update impacts • Restart type Installing the Update Package You can install the In-Service Model Update package on a device by using the install add , install activate , and install commit commands in privileged EXEC mode. The install add command copies the update package from a remote location to the device. You can also use other methods to copy the package; however, you must still enable the install add command for the installation to work.

For the install activate command to work, the package must be available in the device bootflash. Enable the install commit command to make updates persistent over reloads. Installing an update replaces any previously installed data models. At any time, only one update is installed on the device. A data model package includes all updated YANG models and all existing YANG models previously installed on the device. The following flow chart explains how the model update package works: Model-Driven Programmability Update Package Naming Conventions Programmability Configuration Guide, Cisco IOS XE 17.16.x 384