cisco IOS XE 17.16.x — Managing the Update Package

How to Manage In-Service Model Update Managing the Update Package SUMMARY STEPS 1. enable 2. install add file tftp: filename 3. install activate file bootflash: filename 4. install commit 5. install deactivate file bootflash: filename 6. install commit 7. install rollback to { base | committed | id commit-ID } 8. install remove { file bootflash: filename | inactive } 9. show install summary DETAILED STEPS Procedure Model-Driven Programmability How to Manage In-Service Model Update Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 install add file tftp: filename Example:

Device# install add file tftp://172.16.0.1//tftpboot/folder1/ isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Device# install add file tftp://172.16.0.1//tftpboot/folder1/ asr1000-universalk9.2017-08-2317.48.0.CSCxxxxxxx.SSA.dmp.bin _ Copies the model update package from a remote location (via FTP, TFTP) to the device, and performs a compatibility check for the platform and image versions. • You can use other methods to copy the update package from the remote location to the device, however; you still have to execute the install add command before the package is activated. Step 3 install activate file bootflash: filename Example: Device# install activate file bootflash:

isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Device# install activate file bootflash: asr1000-universalk9.2017-08-2317.48.0.CSCxxxxxxx.SSA.dmp.bin _ Validates whether the update package is added through the install add command, and restarts the NETCONF processes. • Perform the install add operation prior to activating an update package. Step 4 install commit Example: Device# install commit Makes the changes persistent over reload. • NETCONF processes are not restarted. Programmability Configuration Guide, Cisco IOS XE 17.16.x 386