Configuration Examples for In-Service Model Updates Example: Managing an Update Package The sample image used in the following examples are a Cisco 4000 Series Integrated Services Router image. The following example shows how to add a model update package file: Device# install add file tftp://172.16.0.1//tftpboot/folder1/ isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin install_add: START Sun Feb 26 05:57:04 UTC 2017 Downloading file Model-Driven Programmability Configuration Examples for In-Service Model Updates Command or Action Purpose Step 5 install deactivate file bootflash: filename Example: Device# install deactivate file bootflash:
isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Device# install deactivate file bootflash: asr1000-universalk9.2017-08-2317.48.0.CSCxxxxxxx.SSA.dmp.bin _ Deactivates the specified update package, and restarts the NETCONF processes. Step 6 install commit Example: Device# install commit Makes the changes persistent over reload. • NETCONF processes are not restarted. Step 7 install rollback to {base | committed | id commit-ID} Example: Device# install rollback to base Rollbacks the update to the base version, the last committed version, or a known commit ID, and restarts NETCONF processes. • Valid values for the commit-id argument are from 1 to 4294967295.
• Older versions of data models updates are available for use. Step 8 install remove {file bootflash: filename | inactive} Example: Device# install remove file bootflash: isr4300-universalk9.16.05.01.CSCxxxxxxx.dmp.bin Device# install remove file bootflash: asr1000-universalk9.2017-08-2317.48.0.CSCxxxxxxx.SSA.dmp.bin _ Removes the specified update package from the bootflash. • A package must be deactivated before it is removed. Step 9 show install summary Example: Device# show install summary Displays information about the active package. • The output of this command varies according to the install commands that are configured. Programmability Configuration Guide, Cisco IOS XE 17.16.x 387